Skip to main content
Yatala, QLD · Australian Made · Family owned Contact Us or ph · 0405 538 413 Mon–Fri 7–4
Guerilla Steel Stables logo with horse head and steel frame on transparent background
FLATPACK KITS / DIY FRiendly / Australian Made
REF · GS-High Airflow

High Airflow Stable System Serries.

two bay horse stable with mesh upper panels and wide gates on gravel pad
Modular steel horse stable bays with roof framing and cladding in a flat pack kit setup
Guerilla Steel Stables standard base stable, 4 × 4 m inside, galvanised 50×50 SHS panels with black ply lower, welded mesh upper, 1500 × 1200 mm swing gate with slam latch, white Trimdek roof with 900 mm front overhang, high airflow raisers lifting the front of the roof 200 mm.
The High Airflow Series introduces a front riser panel to modify the roof pitch. Optimized for maximum ventilation and temperature control in hot climates.
4–6 Week Delivery
20
Reviews
$495.00 – $15,235.00
↳ The range

Browse High Airflows.

The High Airflow series uses a front panel extension to lift and pitch the roof, providing more clearance above the gate. Built around our modular steel panel system, it supports single and multi-bay configurations.
Every kit & panel is a starting point. 
Sizes, gates, panels and #bays all customise.
"If you can think it, we can make it."
— Morgan, Founder

Showing all 13 results

↳ At-a-glance
Pitched Roof Stables with Extra Headroom
Front roof lift for added clearance and airflow

The High Airflow Horse Stable series features an extra panel at the front to pitch the stable roof. The layout maximises ventilation, and improves temperature control in hot climates, while increasing rain runoff in the wet seasons. Built from the same heavy-duty 50×50mm galvanised steel frames as our base model the high airflow bays can be modularly expanded to multiple bays.

Need something different?
Want to add even more extra clearance or a different roof and bay arrangement? Send your dimensions and preferred layout through the form for a custom quote.
Get a Custom Quote

High Airflow Specs

High Airflows in this range include:
Stall Bays
4×4m
4×5m
5×4m
single bay · Inline  · Indoor · Outdoor · Standalone
Sizes
Large
Standard
XLarge
Sizes · Front Orientation
Height
2.4m, airflow-optimised
Taller than most · better ventilation & workflow
Frame
50×50mm
Prefabricated Panels · Cattle Drop Pin & Sleeve Joints · Australian Steel · Galvanised
Gate/Front
Ply Mesh Gate

1500mm W x 1200mm H Straight Gate with recessed slam latch

Panels
Ply Mesh Combo
Full Ply
Prefabricated Panels · Mix Panel Infills · Cattle Drop Pin & Sleeve Joints
Roof
Pitch Roof
900mm front overhang · 100mm rear overhang · Flush side finish · Trimdek® alternative”
Install
DIY (8–14 hrs) or Pro (1 day)
Delivery & Install to South East Qld & Northern NSW
✎
Build it your way
Not sure what Stable OR SHELTER you need?
A 60-second quiz that does the legwork for you. Six questions about your horses and your block, and you'll get a recommendation with a real price, on screen, same page, no email.
Size? # Bays? Price?
↳ More Info

Building Buying & Owning - Horse Stable

Frequently asked Questions

For still or gentle rain, yes. For wind-driven rain, no. Where you put the shelter, and which way it faces, will make more difference than the overhang.

The roof edge sits about 2.45–2.5m up, and 900mm out from the front. Rain falls at an angle that depends on wind speed. Typical drops fall at about 6–9m/s, so even light wind tilts them noticeably. Learn more about Horse Shelter Weather Protection

The High Airflow series has a roof pitch of approximately 3°, with a front panel extension lifting the roof 200mm above the gate. This adds headroom, improves ventilation through the bay and directs rain runoff to the rear.

Useful for taller breeds, maternity stables and also for warmer and wet climates. The extra airflow helps reduce heat and ammonia build-up around mares and new born foals.

↳ Continue Browsing

Ready to Build Your Perfect Stable?

Modular. Customisable. Aussie-built.