Indoor Retrofit Stable
Base Model Horse stall kits.



Browse Base Models.
Sizes, gates, panels and #bays all customise.
"If you can think it, we can make it."
Showing all 15 results
-

Base ModelStandardHorse StableGS-BASE-STD-1OrientationDimensionSTALL CountStandard 1 Bay Stable Kit
$4,950.00 -

Base ModelStandardHorse StableGS-BASE-STD-2OrientationDimensionSTALL CountStandard 2 Bay Stable Kit
$9,350.00 -

Base ModelStandardHorse StableGS-BASE-STD-4OrientationDimensionSTALL CountStandard 4 Bay Stable Kit
$18,150.00 -

Base ModelLargeHorse StableGS-BASE-LG-4F-1OrientationDimensionSTALL CountLarge Horse Stable Kit Single Bay 4m Front
$7,480.00 -

Base ModelLargeHorse StableGS-BASE-LG-5F-1OrientationDimensionSTALL CountLarge Horse Stable Kit Single Bay 5m Front
$7,480.00 -

Base ModelXLargeHorse StableGS-BASE-XLG-1OrientationDimensionSTALL CountXLarge Maternity Stable Kit Single Bay
$8,250.00 -

Base ModelStandardHorse StableGS-BASE-STD-3OrientationDimensionSTALL CountStandard 3 Bay Stable Kit
$13,750.00 -

Base ModelLargeHorse StableGS-BASE-LG-4F-3OrientationDimensionSTALL CountLarge Stable Kit Triple Bay 4m Front
$19,800.00 -

Base ModelLargeHorse StableGS-BASE-LG-5F-3OrientationDimensionSTALL CountLarge Horse Stable Kit Triple Bay 5m Front
$19,800.00 -

Base ModelLargeHorse StableGS-BASE-LG-4F-2OrientationDimensionSTALL CountLarge Horse Stable Kit Twin Bay 4m Front
$13,200.00 -

Base ModelLargeHorse StableGS-BASE-LG-5F-2OrientationDimensionSTALL CountLarge Horse Stable Kit Twin Bay 5m Front
$13,200.00 -

Base ModelXLargeHorse StableGS-BASE-XLG-3OrientationDimensionSTALL CountXLarge Maternity Stable Kit Triple Bay
$23,100.00 -

Base ModelXLargeHorse StableGS-BASE-XLG-2OrientationDimensionSTALL CountXLarge Maternity Stable Kit Twin Bay
$15,400.00 -

Base ModelLargeHorse StableGS-BASE-LG-5F-4OrientationDimensionSTALL CountLarge Horse Stable Kit Quad Bay 5m Front
-

Base ModelXLargeHorse StableGS-BASE-XLG-4OrientationDimensionSTALL CountXLarge Maternity Stable Kit Quad Bay
The Guerilla Steel Base Model Stable is a modular, high-durability horse stable manufactured by Guerilla Steel in Yatala, Queensland. It is specifically engineered to handle the harsh Australian climate. Designed as a 4m x 4m (16m²) single-bay setup for both indoor shed retrofits and standalone outdoor bays. It provides highly scalable foundation that can easily expand into multi-bay configurations as your property or herd grows. . Available as a DIY-friendly flat-pack kit or for professional installation.
Base Model Specs
1500mm W x 1200mm H Straight Gate with recessed slam latch
Horse Stable builds working In The Field.
Indoor Retrofit Stable
Indoor Retrofit Stable
Indoor Stable Shed Conversion Samford Valley QLD
Horse Stable
Single Standalone Horse Stable
Horse Stable
Standard Horse Stable
Indoor Retrofit Stable
Pergola Triple Bay Retrofit Stable
Upgrade, Horse Stable
Large 2-bay Horse Stable Yoke Gates
Building Buying & Owning - Horse Stable
Frequently asked Questions
A concrete slab is not required for every stable installation. The system can also be installed on compacted road base, crusher dust, gravel or level grass, provided the site is level and drains properly. Concrete is a good option for high traffic areas and gives you a very stable, low movement base. For grass or gravel installations, specialised ground anchors can be used to secure the stable. The biggest priority is good site preparation. A level base with effective drainage will make installation easier and help prevent movement, pooling water and ongoing maintenance issues.
It depends on your base. For grass, road base, gravel or crusher dust, use a ground anchor kit. Concrete footings at anchor points can add support without requiring a full slab.
For a concrete slab, use suitable concrete anchors such as Dynabolts instead. Shed conversions may also need fixings to existing posts or walls, depending on the panel layout.
Guerilla Steel stables are built from Australian steel and fabricated in our Yatala workshop. The stable frames use 50mm RHS steel tube, with 4mm galvanised steel mesh used across gates and upper panel sections. Lower wall sections are fitted with black ply inserts, with options for full ply or different ply and mesh combinations depending on the setup. Roofing is supplied in Australian steel Monoclad sheeting, cut to suit the stable configuration. For detailed dimensions, panel combinations and upgrade options, see our base model comparison page.
Info For Customers

Building Your Own Horse Stable? DIY Flat Pack Kit’s are Easier Than You Think.

Horse Stable Design Planning Guide: Best Sizes, Setup Tips, Planning Advice

Planning your Horse stable? Get the Stable Building Site Prep Checklist






























