Multi Bay Modular Stable Kits.

The Guerilla Steel range works as one modular system. You can add bays, tack rooms or wash areas anytime without rebuilding the original stable. Front/rear and end/dividing panels are interchangeable across our stables and shelters, making it easy to reconfigure your layout or add more bays later.

If you’re likely to expand, plan the orientation, access and available space from the start.

Yes. Additional bays can be incorporated into the same modular panel system for stables, tack rooms or open livestock areas, depending on the layout you need. Guerilla Steel panels are fully welded units that connect together to form larger multi bay runs. If the existing ply has weathered over time, the black ply inserts can be replaced or repainted so the older and newer sections present more consistently.

There is no standard maximum number of bays. The modular panel system can be configured from a single stable through to larger multi bay runs. The practical limit comes down to your available site space, access and the overall layout you need. If you are planning a larger run, it is worth thinking through future expansion from the beginning so additional bays can be added in the right direction.

Prefabricated panels have four insert sections, which can be configured with black ply, steel mesh, or a combination of both. The standard setup is black ply in the lower two sections with steel mesh above, but you can change the mix to suit the stable. Options range from full ply through to three ply sections with one mesh section, or other combinations as needed. Dual gate access panels can also be arranged.

Yes. The modular panel system means larger stable setups can be dismantled, transported and reassembled at another property. Even when the stable has been anchored to a slab, the fixings can be removed so the panels can be relocated. This makes the system more flexible than a permanently built structure and can also help retain resale or relocation value if your property needs change