Custom Horse Stable
Guerilla Steel Modular Horse Stable – Strong, Built to Last, Customise your stable
$4,500.00
Single Custom Stable Kit - Customer Install
★★★★★
"Exceptionally built and next level customer service. We decided to DIY install ourselves, The install was literally so easy myself and my husband were able to put the whole thing together easily. so"
Jess Allsopp
Read Full Google Review →Thinking of something similar?
Get a quote for your own
or talk to Morgan · 24hr reply
"If you can think it, we can make it."
Summary
Jess from Gyra successfully completed a DIY install of the Guerilla Steel 4m x 4m standard horse stable and gave Morgan and the Team a glowing 5 start review. DIY-friendly flat pack kit delivered with modular upgrades available now and later.
Build It Your Way
DIY Horse Stable Kit
Even first-timers nailed this install with zero stress.
True easy two-person DIY in hours, not days.
Pre-welded frame and clear numbered steps let Jess (self-described “small weak human” – but we think she is Guerilla Tough!) and her husband assemble the full 4m x 4m bay on their own, phone support ready but barely needed.
Road base pad with natural drainage built in.
Client arranged levelled compacted road base foundation to elevate the stable just right for runoff, cost-effective foundation that flexes with rural blocks, no concrete pour required.
Full ply weather shield on heavy-duty mesh
Solid lower kickboards block rain/wind while mesh tops deliver essential QLD airflow, keeps horses dry, cool and visible without stuffy enclosures.
- 4m x 4m Welded steel frame with full ply kickboards
- Ply Mesh-front upper section for airflow
- Flat roof with 2.5m clearance
Project Gallery
*some (low quality) images have been enhanced and illustrations created with AI. If you are an existing customer and would like to share photos of your Guerilla Steel Build please email us
Jess and her husband needed a sturdy, no-fuss horse shelter for their rural block, one that could be DIY-installed without compromising strength. They chose a single 4m x 4m stable bay with full ply panels to keep out the weather in Gyra.
The stable sits on a well-prepped pad of compacted road base, carefully levelled and slightly elevated for proper runoff. This base choice offered a cost-effective and flexible foundation for the couple’s property layout.
The build included all the essentials, welded frame, full ply lining, mesh airflow up top, and a solid roof to keep out the worst of the weather. Even better, they opted to install it themselves. Thanks to the clear assembly guide and optional phone support, the process was literally so easy, even for first-time builders.
- Hobby farms seeking a single horse stall solution.
- DIYers looking for a sturdy, budget-friendly install using Aussie-made gear.
- Rural blocks needing secure weather protection in wet paddocks.
Three modular upgrade ideas for this compact 4 m x 4 m DIY stable, matching the images’ black ply/mesh aesthetic and field setup.
Extend to a matching twin-bay row.
Bolt on an identical second bay to the side or rear, using the same frame connectors, doubles capacity instantly for growing herds, shares the roofline for full coverage, and keeps the clean modular look.
Add a front shade sail or overhang extension.
Attach a steel-framed 2 m roof frame as an extension with roof sheeting or even tensioned shade mesh, creates covered feed/tie-up space ahead of the doors, protects against QLD sun/rain while matching the galvanized finish.
Upgrade doors to yoke swing gates.
Replace standard doors with half-height black yoke swings, improves horse contact and handler access for daily routines, bolts straight onto existing posts for easy retrofit..
| Component | Description | Est. Cost |
| Stable Kit | 4x4m Standard standalone stable | 4500 |
| Front Panels | 4m with standard swing gate | Included |
| Panels – Custom | 4x4m Stable Kit Panel Upgrade Full Ply 3 Sides | 1300 |
| Roof | Standard Flat roof | Included |
| Anchors | (1x) Ground Anchor Kit | 100 |
| DIY support | DIY Support for Flatpack Delivery kit | included |
| Total | $5,900 |
Outdoor Installation per bay | Standard 550; Large 700; XLarge 850;
Project break down is current at time of publishing, for accurate quote please get in touch or visit Base Model Compare page for instant estimate
Every Guerrilla Steel project follows a simple principle: build once, build right. The process focuses on practical planning, precision manufacturing, and long-term durability so the stable becomes a lasting asset—whether you plan to use it as a permanent structure or relocate and reconfigure the modular panels later.
Design & Planning
The process begins with choosing the right configuration for your property, horses, and daily workflow. Stable size, layout, ventilation, and site access are considered so the structure works with your land and long-term plans.
Precision Manufacturing
Each stable is fabricated in the Guerrilla Steel workshop using Australian RHS steel framing, welded panels, and durable roofing materials. Manufacturing in a controlled environment ensures consistency, strength, and long service life.
Delivery & Installation
Modular panels are delivered ready for assembly. Many customers install the system themselves using the DIY friendly flat-pack design, while others choose professional installation. Either way, the modular system keeps the build straightforward and predictable.
Ownership & Maintenance
Once installed, the stable becomes part of the property’s working infrastructure. Routine checks, cleaning, and occasional maintenance keep the structure performing for decades while protecting the horses inside.
