RHS Galvanised Steel
Triple Cattle Rail Paddock Shelter Panel 4m
The Triple Cattle Rail Paddock Shelter Panel is a single 4m panel for a compatible Guerilla Steel shelter layout. Use it as a rear wall, end panel or divider.
Three horizontal cattle rails provide smaller openings than the double-rail configuration while keeping the sides open. The welded steel panel connects to the modular stable and shelter system.
- Includes: One 4000mm panel
- Cattle rails: 115 × 42mm cattle rail, triple-rail configuration
- Mid rail: Positioned at 1200–1250mm
- Connection pins: L-cattle drop pin/sleeve
Panel only. Roofing and other shelter panels are sold separately.
Three Rails with Open Airflow & Visibility
A 4m individual open-rail panel for building out or extending your paddock shelter, with closer rail spacing. Providing a visually and physically denser config that discourages horses and smaller animals from testing the perimeter or trying to force through to graze on the other side
GS-592 / August 2026
✦ Customised
4 Bay Stable Integrated Wash Bay
A four-stall stable built around a central wash bay rather than one at the end, cutting how far each horse travels and keeping every stall in sight during washing, farrier or vet work. Galvanised steel frame, solid lower panels with mesh above for airflow, 80m² total, erected in a day and a half despite rain.
What Guerilla Steel Stable Owners Say
Building Buying & Owning - Stable Panel
Stable Panel FAQs
Our fully welded panels connect using heavy-duty cattle drop pins. The connection points line up and the pins drop into place. The pin sleeve joint make assembly straightforward and allows panels to be reconfigured or additional bays added later.
Standard panel frames measure 4000mm long × 2400mm high × 50mm thick. A standard 4m × 4m stable provides 16m² of internal floor space, with an outside frame measurement of 4100mm × 4100mm.
Each adjoining bay shares a dividing panel and adds 4050mm to the overall length: 4000mm for the additional front panel, plus 50mm for the next end or dividing panel.
| Configuration | Outside frame dimensions | Internal floor area |
|---|---|---|
| Single bay | 4100mm × 4100mm | 16m² |
| Two adjoining bays | 8150mm × 4100mm | 32m² |
| Three adjoining bays | 12,200mm × 4100mm | 48m² |
These are frame dimensions. Roof overhangs extend beyond this footprint and need to be allowed for when planning your site.
The Guerilla Steel range works as one modular system. You can add bays, tack rooms or wash areas anytime without rebuilding the original stable. Front/rear and end/dividing panels are interchangeable across our stables and shelters, making it easy to reconfigure your layout or add more bays later.
If you’re likely to expand, plan the orientation, access and available space from the start.
End and dividing panels use double pin sleeves. Front gate and rear panels use matching single pin sleeves. These line up so the connecting pins can drop into place.
When ordering panels individually, select the correct sleeve configuration for where the panel will sit. If you’re adding to an existing stable, send us a photo of the connection points so we can confirm the match before you order.
No welding or advanced building skills are needed. Each front side and dividing panel arrives fully welded. They connect together with pin and sleeve joints. You’ll need to keep panels square and level, and securely anchor the frame. Have another person help position and hold panels. See the DIY Stable Guide
Have these tools ready:
- Cordless drill or impact driver
- Socket and spanner set
- Spirit level and tape measure
- Rotary hammer drill if anchoring into concrete
- Ladder, clamps and appropriate safety gear
Info For Customers

Horse Stable Design Planning Guide: Best Sizes, Setup Tips, Planning Advice

Planning your Horse stable? Get the Stable Building Site Prep Checklist

Steel Horse Stable Maintenance, A Practical Guide for Long-Term Strength and Safety

Building Your Own Horse Stable? DIY Flat Pack Kit’s are Easier Than You Think.
Upgrade & Customise
Configure with different modular addons, and upgrades available. Change mesh tops, swap form ply panels, upgrade gates, or roofing options. Add a tack room, wash bay or day yard. See the full range for all options.

Guerilla Steel Ground Anchor Kit – 4x Anchors Per Bay, Suits Ground/Gravel/Grass Set for 1 Bay

Guerilla Steel Yoke Gate upgrade provides a higher barrier with head-out access for younger, high-energy horses or stallions prone to testing stable gates

Guerilla Steel 4m Front Roof Pitch Frame – Per Bay, Improved Fall, Drainage & Airflow (Includes Set of 2x 2000mm x 250mm h Panels per bay)
More Options
Not sure if this one's right for you?
Tell us 3 things and we'll come back with a recommendation. No quote yet — just an honest opinion from someone who builds these every day.
or just call · 0405 538 413




