RHS Galvanised Steel
Stable or Shelter Roof Extensions for Sides – 4m Depth bay
Left and right side roof extensions for 4 m deep stable and shelter bays, adding 450 mm of cover past each end wall. Together they widen the roof by 900 mm, for more shade in high heat and more protection from sideways rain at the ends of the stable.
Prefabricated from 50 × 50 mm galvanised RHS in our Yatala, QLD workshop and sheeted with the same trapezoidal ribbed steel sheeting (Trimdek® or Monoclad® profile) as the main roof. The pair suits Standard 4 m × 4 m bays and Large bays with a 5 m front, and is added as an upgrade when you order a stable or shelter.
- Includes: 1 left and 1 right side extension
- Extension: 450 mm each side (900 mm total)
- Suits: 4 m deep bays (Standard 4 × 4 m, Large 5 m front)
- Sheeting: trapezoidal ribbed steel sheeting (Trimdek® or Monoclad® profile)
- Frame: 50 × 50 mm galvanised RHS
$1,320.00
Weather Coverage stable side roof extensions
Guerilla Steel 4m Side Roof Extensions – Left and Right Per structure
Adds extra weather, rain and sun coverage to the ends of your stable or shelter
What Guerilla Steel Stable Owners Say
Building Buying & Owning - Stable Panel
Stable Panel, Upgrade FAQs
Our fully welded panels connect using heavy-duty cattle drop pins. The connection points line up and the pins drop into place. The pin sleeve joint make assembly straightforward and allows panels to be reconfigured or additional bays added later.
Standard panel frames measure 4000mm long × 2400mm high × 50mm thick. A standard 4m × 4m stable provides 16m² of internal floor space, with an outside frame measurement of 4100mm × 4100mm.
Each adjoining bay shares a dividing panel and adds 4050mm to the overall length: 4000mm for the additional front panel, plus 50mm for the next end or dividing panel.
| Configuration | Outside frame dimensions | Internal floor area |
|---|---|---|
| Single bay | 4100mm × 4100mm | 16m² |
| Two adjoining bays | 8150mm × 4100mm | 32m² |
| Three adjoining bays | 12,200mm × 4100mm | 48m² |
These are frame dimensions. Roof overhangs extend beyond this footprint and need to be allowed for when planning your site.
The Guerilla Steel range works as one modular system. You can add bays, tack rooms or wash areas anytime without rebuilding the original stable. Front/rear and end/dividing panels are interchangeable across our stables and shelters, making it easy to reconfigure your layout or add more bays later.
If you’re likely to expand, plan the orientation, access and available space from the start.
End and dividing panels use double pin sleeves. Front gate and rear panels use matching single pin sleeves. These line up so the connecting pins can drop into place.
When ordering panels individually, select the correct sleeve configuration for where the panel will sit. If you’re adding to an existing stable, send us a photo of the connection points so we can confirm the match before you order.
No welding or advanced building skills are needed. Each front side and dividing panel arrives fully welded. They connect together with pin and sleeve joints. You’ll need to keep panels square and level, and securely anchor the frame. Have another person help position and hold panels. See the DIY Stable Guide
Have these tools ready:
- Cordless drill or impact driver
- Socket and spanner set
- Spirit level and tape measure
- Rotary hammer drill if anchoring into concrete
- Ladder, clamps and appropriate safety gear
Info For Customers

Steel Horse Stable Maintenance, A Practical Guide for Long-Term Strength and Safety

Building Your Own Horse Stable? DIY Flat Pack Kit’s are Easier Than You Think.

Planning your Horse stable? Get the Stable Building Site Prep Checklist

Horse Stable Design Planning Guide: Best Sizes, Setup Tips, Planning Advice
Upgrade & Customise
Configure with different modular addons, and upgrades available. Change mesh tops, swap form ply panels, upgrade gates, or roofing options. Add a tack room, wash bay or day yard. See the full range for all options.

Guerilla Steel Ground Anchor Kit – 4x Anchors Per Bay, Suits Ground/Gravel/Grass Set for 1 Bay

Guerilla Steel Yoke Gate upgrade provides a higher barrier with head-out access for younger, high-energy horses or stallions prone to testing stable gates

Guerilla Steel 4m Front Roof Pitch Frame – Per Bay, Improved Fall, Drainage & Airflow (Includes Set of 2x 2000mm x 250mm h Panels per bay)
More Options
Not sure if this one's right for you?
Tell us 3 things and we'll come back with a recommendation. No quote yet — just an honest opinion from someone who builds these every day.
or just call · 0405 538 413Ready to Order Your 4m Roof Extension?
$1,320.00







