Built Once. Built Right.
Are you planning a new stable build but not sure how to get your steel stable onto the ground? You’ve got three solid options:
Each one works. But which is right for your time, tools, and budget?
Best for: Handy owners with basic tools and a spare weekend You save cash, stay in control, and get it done your way.
The owner took on the build using Guerilla Steel’s fully welded galvanised panels, mesh tops, and black ply kickboards.
Our stables are made for DIY. Every section is pre-welded. Every part’s labelled. No cutting. No welding. Just bolt and go. If you’ve got a drill, a ladder, and a mate to help, you’re sorted. A 1, 2 bay setup usually takes a day, some get it done faster. Comes with all bolts and fixings Clear install plans and reference photos Phone support if you get stuck
One Couple built a single-bay in under 5 hours. Horses moved in by sunset!
Best for: Anyone inside our service zones who wants it done fast and done right You get a clean, square, pro finish with zero stress
Our install crew handles the full setup, from unloading to anchoring. Got a slope or dodgy drainage? We’ll adjust on-site. With hundreds of installs across QLD, we’ve seen it all, and solved it all. Show up with gear ready Adapt to tricky layouts Work through weather and terrain Leave it tight, level, and done
We’ll even flip the roof pitch if it helps drainage.
Best for: Regional buyers outside our service zones, You still get expert results, with local muscle and our guidance
We’ve worked with dozens of licensed builders. You supply the kit. They handle the build. We back them with phone and doc support. Here’s what your builder gets: Step-by-step install guide Phone backup from us Diagrams and detail shots Touch-up paint, fixings, and gear
Heads up: Just make sure they read the manual, and call if they hit a snag.
| Option | Best For | Pros | Cons |
|---|---|---|---|
| DIY Build | Handy owners with time & tools | Cheapest, fast build, full control | Needs effort, some skill, site prep |
| GS Install Team | Buyers in service areas | Pro result, no lifting, adjusted on-site | Higher cost, zone-limited availability |
| Local Builder | Regional buyers wanting expert help | Local labour, supported by our docs | Quality varies, needs coordination |
This ain’t a flat-pack puzzle. No mystery bolts. No dodgy instructions. No drama. Our kits are: Fully welded frames – no frame builds! Panelled and pre-drilled, Clearly labelled, match, bolt, done
All you’ll need is a drill, ladder, a mate or two to help, Ideally a slab or compacted base ready.
We highly recommend anchors for grass and road base installs. If you need base prep help, We’ve got guides and advice ready.
If you’re short on time or tools, tackling a big or multi-bay stable, or dealing with a site that’s sloped or has drainage issues, professional install makes sense. Whether it’s our crew or a trusted local builder, you’ll get it done fast, clean, and solid. We’ll handle the details or support your builder so your stable goes up right the first time.
If we can’t get there, no worries. Try a local builder – Plenty of our customers go this route. We stay involved on the phone if needed. A good local builder can:
We don’t just install. We adjust on-site to suit your land and make sure the structure lasts. Use our install crew if, The stable’s big, multi-bay and custom.
These stables aren’t built for one season. They’re built for decades. No matter which way you go, you’re getting the same steel backbone:
Still unsure? Send us a photo of your site. We’ll help map out the best install path for your timeline, tools, and goals.
The owner took on the build using Guerilla Steel’s fully welded galvanised panels, mesh tops, and black ply kickboards.
A compact 1-bay stable built on a grassed property in Gyra, this project shows how approachable DIY can be with the right gear and guidance. With every part pre-labelled and bolt-ready, the frame went up clean and level in just a few hours. Even as a first-time builder, the customer got it done without dramas, and had their horse moved in by sunset.
DIY might look cheaper for building a horse stable, but hidden costs in time, tools, and mistakes add up fast. Hiring a professional builder gives you quality, safety, and long-term value. Modular designs let you start small and expand later, while Aussie-made steel ensures your stables last in tough conditions.
All stable pricing, and estimates mentioned in this article are current at time of publishing, for accurate quote please get in touch or visit Base Model Compare page for instant estimate
© 2026 Guerilla Steel. ABN 25 713 977 300. All rights reserved.
