Are you planning a new stable build but not sure how to get your steel stable onto the ground? You’ve got three solid options:
- Build it yourself
- Get our crew on-site
- Hire a local builder
Each one works. But which is right for your time, tools, and budget?
Option 1: DIY Build
Best for: Handy owners with basic tools and a spare weekend You save cash, stay in control, and get it done your way.
Build Your Own Horse Stable? DIY Flat Pack Kit’s are Easier Than You Think.
The owner took on the build using Guerilla Steel’s fully welded galvanised panels, mesh tops, and black ply kickboards.
Our stables are made for DIY. Every section is pre-welded. Every part’s labelled. No cutting. No welding. Just bolt and go. If you’ve got a drill, a ladder, and a mate to help, you’re sorted. A 1, 2 bay setup usually takes a day, some get it done faster. Comes with all bolts and fixings Clear install plans and reference photos Phone support if you get stuck
One Couple built a single-bay in under 5 hours. Horses moved in by sunset!
Option 2: Guerilla Steel Install Team
Best for: Anyone inside our service zones who wants it done fast and done right You get a clean, square, pro finish with zero stress
Our install crew handles the full setup, from unloading to anchoring. Got a slope or dodgy drainage? We’ll adjust on-site. With hundreds of installs across QLD, we’ve seen it all, and solved it all. Show up with gear ready Adapt to tricky layouts Work through weather and terrain Leave it tight, level, and done
We’ll even flip the roof pitch if it helps drainage.
Option 3: Hire a Local Builder
Best for: Regional buyers outside our service zones, You still get expert results, with local muscle and our guidance
We’ve worked with dozens of licensed builders. You supply the kit. They handle the build. We back them with phone and doc support. Here’s what your builder gets: Step-by-step install guide Phone backup from us Diagrams and detail shots Touch-up paint, fixings, and gear
Heads up: Just make sure they read the manual, and call if they hit a snag.
Stable install Options at a Glance
| Option | Best For | Pros | Cons |
|---|---|---|---|
| DIY Build | Handy owners with time & tools | Cheapest, fast build, full control | Needs effort, some skill, site prep |
| GS Install Team | Buyers in service areas | Pro result, no lifting, adjusted on-site | Higher cost, zone-limited availability |
| Local Builder | Regional buyers wanting expert help | Local labour, supported by our docs | Quality varies, needs coordination |
Still Think DIY’s Too Hard?
This ain’t a flat-pack puzzle. No mystery bolts. No dodgy instructions. No drama. Our kits are: Fully welded frames – no frame builds! Panelled and pre-drilled, Clearly labelled, match, bolt, done
All you’ll need is a drill, ladder, a mate or two to help, Ideally a slab or compacted base ready.
We highly recommend anchors for grass and road base installs. If you need base prep help, We’ve got guides and advice ready.
Why Go with a Professional Install from a Local Builder?
If you’re short on time or tools, tackling a big or multi-bay stable, or dealing with a site that’s sloped or has drainage issues, professional install makes sense. Whether it’s our crew or a trusted local builder, you’ll get it done fast, clean, and solid. We’ll handle the details or support your builder so your stable goes up right the first time.
If we can’t get there, no worries. Try a local builder – Plenty of our customers go this route. We stay involved on the phone if needed. A good local builder can:
- Prep your slab or compacted base
- Follow our guide and photos
- Add any extras your council needs
When Should You Call in Our Team?
We don’t just install. We adjust on-site to suit your land and make sure the structure lasts. Use our install crew if, The stable’s big, multi-bay and custom.
Pick What Fits You Best
These stables aren’t built for one season. They’re built for decades. No matter which way you go, you’re getting the same steel backbone:
- 50×50 mm RHS steel, fully welded
- 2.4 m height, for airflow and comfort
- Built in our QLD workshop, site-ready
Still unsure? Send us a photo of your site. We’ll help map out the best install path for your timeline, tools, and goals.
DIY Stable Install Frequently Asked Questions
Single Bay DIY Horse Stable Install – Gyra, NSW
1 Horse Stable DIY Build
The owner took on the build using Guerilla Steel’s fully welded galvanised panels, mesh tops, and black ply kickboards.
A compact 1-bay stable built on a grassed property in Gyra, this project shows how approachable DIY can be with the right gear and guidance. With every part pre-labelled and bolt-ready, the frame went up clean and level in just a few hours. Even as a first-time builder, the customer got it done without dramas, and had their horse moved in by sunset.
